Headsets

The FSA Orbit Xtreme Pro threadless headset is constructed of forged and CNC machined 7075/T6 aluminum cups. - Stainless steel Angular Contact Bearings - Stainless steel crown race - 1.5'' patented alignment tip for increased durability and performance - Deep Cup model has 22mm insertion of upper and lower cups

A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race - Impact: 45x45 degree Campagnolo Integrated - S.H.I.S.: IS42/28.6|IS42/30 - Stack: 8mm/1mm - Color: Black, Orange, Red - Weight: 68g

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our headsets have three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Headset bearings for Wolf Tooth headsets. - Replacement bearings

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC34/28.6-26tpi|EC34/30 - Steerer Dia: 28.6mm - Cup Dia: 34mm - Race Dia: 30mm - Stack Ht: 40mm Size: 1-1/8"

- Forged steel cups with caged 5/32" ball bearings - TH-857 features a alloy top cover - TH Series: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 14.9mm/11mm - Color: Black - Weight: 126g

Origin8's Twistr Semi-Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, and the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut

The Sunday BMX integrated headset is designed to be a quality headset at an affordable price. - Laser-etched Sunday logo - Color-matching spacers included - Gyro compatible - High quality sealed bearings and precision tapered wedge help to keep the headset tight

The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings. - Classic shape with modern styling for high-end road bikes - For threadless steerers - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - Laser etched aluminum top cap - Weight: 82g

Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage. - Steerer size: 1-1/8" upper - Drop-in (IS) or Press-Fit (S) - Weight: 35-44g

Custom Cane Creek lower race for Salsa.

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

- CrMo headset with oversized 3/16" lower ball bearings, 5/32" upper bearings and an alloy top cover - Mallet: External Cup, traditional - S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm - Color: Black - Weight: 150g

Building upon Cane Creek's ongoing legacy of bicycle headset innovation, the introduction of the New Hellbender 70 Visco brings new patented steering stabilizing technology to a wide variety of cycling disciplines. Designed to reduce high-frequency oscillation of the bicycle steering assembly, known as speed wobble. The Cane Creek Hellbender 70 Visco headset helps riders maintain control, reduce fatigue and ride with confidence. -Stabilized steering with Cane Creek’s Patented headset damping technology; utilizing Micro-thin plates with fluorocarbon gel in between -Includes a pre-set “mid-tune” damping, each layer; Damping effects are tunable for rider preference -7075 T6 Aluminum construction -Sealed, stainless-steel Hellbender bearings

Replacement headset uppers from FSA. - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Upper: IS41 - Upper Stack Height: 8.2

The Sunday BMX integrated headset is designed to be a quality headset at an affordable price. - Laser-etched Sunday logo - Color-matching spacers included - Gyro compatible - High quality sealed bearings and precision tapered wedge help to keep the headset tight

• Aluminum • Semi-sealed mechanism • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum

Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g

The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets. - "Zero-Stack"/Cane Creek compatible - Very low profile designed primarily for Mountain Bikes - Patented alignment tip for increased durability and performance - TH brand 36-degree Micro Angular Contact Bearings (red seal) - 7075 alloy crown race - Laser etched aluminum top cap