Parts & Accessories

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up

A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC

The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop

Classic roll-top design and heat-sealed seams make this spacious 75-liter dry bag totally waterproof. Constructed with 500D tarpaulin fabric that is both tough and lightweight. Includes shoulder strap and carry handles. - Capacity: 75 liters - Weight 2.62 lbs. - Shoulder strap and carry handle - Designed for Burley Coho XC and Flatbed bike trailers

Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.

Replacement safety flag for extra visibility.

Don’t let your adventures be limited to the pavement. The 16+ Wheel Kit improves handling over snow, sand and gravel. The kit includes two 16x3” push button wheels with a knobby tread. A wide range of acceptable tire pressures let you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps for your passengers. Say goodbye to the sidewalk. Constructed with aluminum rim/hub and stainless steel spokes.

Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.

Burley’s official adapter for bikes with a 12mm thru axle. Stock thru axles are not able to accommodate any sort of axle mounted hitch system. The Burley Thru Axle is a requirement for any axle mounted hitch system with a bike that has a 12mm thru axle. Burley's new Thru Axles have an external male threading on the end to accommodate the installation of our axle mounted hitch system.

Burley's Flex Connector joins the trailer to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily letting you lay down the bike. Includes safety strap and retaining pin.

Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!

Soft and snuggly, the Baby Snuggler keeps your littlest traveler comfortable and secure when jogging, strolling, or biking. Recommended for children 6-24 months of age. Child should be at least one year old before biking in trailer (child must be able to sit upright unattended and hold his or her head up while wearing a bicycle helmet). For children less than one year old it is recommended to only use the Snuggler for strolling and jogging.

The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers

This Travoy hitch from Burley connects your Travoy trailer (sold separately) to your bicycle seatpost. Replace a lost hitch or get one for each bike in your quiver for convenience.

Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!

The Burley Ballz Nutted Axle Adapter includes a set of threaded Ballz that replace the nuts on your current nutted axle, enabling compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with nutted axles. - Official Burley Ballz adapter for bikes with nutted axles - Two Burley Ballz that thread onto the existing nutted axle - Quick and easy one-time installation - Specially designed for use with the Coho XC

Burley's Hitch Alt Adapters enable use of the standard Burley hitch on bicycles that have rear dropouts that don't allow normal installation of the hitch (the dropouts are the parts of the frame where the rear wheel is attached). This type of adapter is installed in place of the non-drive (left) side axle nut and once it's in place, the Burley hitch is installed to the adapter.

Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Two roll-top, waterproof panniers keep gear dry and organized. Compatible with all 10mm rack bars and have a combined capacity of 22 liters. Bright colors and reflective patches provide increased visibility. Constructed with 500D waterproof tarpaulin with heat-sealed seams. - Waterproof - Compatible with 10mm rack bars - Large reflective patches - Easy-to-use carry handle - Combined weight: 2.09 lbs.

Enables connection of the Coho XC trailer to bikes with QR skewers. These QR skewers replace the existing QR skewer on your bike to enable compatibility with the Coho XC cargo trailer. This adapter is required to use the Coho XC on bikes with QR skewers. The standard version of this skewer is included with the Coho XC out of the box. - Easily replace your rear QR skewer to attach the Coho XC - Quick and easy installation - Specially designed for use with the Coho XC

Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.

This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14

Burley’s Quick Hitch allows for tool-free installation to connect the Travoy to the bicycle seat post. Attaches and detaches for easy transitions between bikes.

Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon

Take your furry friend all over town with the Tail Wagon Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. - Tool-free installation - Stroller wheels push easily - Compact footprint for maneuverability in tight spaces - Compatible with 2008 – current Tail Wagon models

The Lower Market Bag is a large bag for transitioning from a shopping to a cycling experience. It features see-through mesh for easy viewing, while an open-top design allows for taller cargo and cinch webbing to secure your items. Features: - Side cinch webbing to close bag top - Adjustable-length shoulder strap for varying heights - Exterior slip pocket with easy access for quick stops - Pocket-sized interior slip for locks or to keep smaller items organized - Stowable bag clips (4) for Travoy bike trailer connection and seamless use on or off bike - Durable lower tarpaulin fabric bottom for additional protection - Removable rigid bottom provides a stable platform for cargo - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 40 - Weight (lbs/kg): 1.52 / 0.69

The Coho Pannier Rack allows for the attachment of panniers to the fender of the Coho XC. The 10mm bar allows for use with many different types of panniers. Pair the Coho Pannier Rack with the Burley Pannier Set for even more carrying capacity on your Coho XC. - Specially designed for use with the Burley Coho XC - Easy installation - Compact form factor

This messenger style bag is elevated with modern features tuned to a professional’s needs for cycling and a full workday. From the morning commute to airline travel, this everyday carry keeps necessities well-organized and within reach. The shoulder sling keeps it at your side, or utilize the Travoy trailer's upper deck connection for a bike cargo trailer experience. Features: - Multiple tech compartments including a padded laptop sleeve (up to 15.6") and tablet sleeve for safe and secure storage - Water-resistant fabric with a tarpaulin bottom for additional protection - Suitcase handle sleeve for securing to rolling luggage - Fleece-lined front pocket for smaller valuables - Stowable bag clips (4) for Travoy bike trailer connection - Exterior slip pockets readily accessible for quick stops - Breathable back panel - Internal organization pockets keep everything in its place - Utility clip for keys - Quick-release buckles secure messenger flap - Removable shoulder sling tucks away when not in use - Cross-body strap keeps the bag centered on the back when riding - Light loop for accessory lighting - Compatibility: 2010 – Current Travoy Specifications: - Volume (Liters): 12 - Weight (lbs/kg): 1.7 / 0.77