Skip to main content

Filter By:

  • Show More Model Years
  • Show Fewer Model Years

Hubs

Bontrager Rapid Drive 108 Fat Rear Hub
$199.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high quality wheelset. Product details - Bontrager rear hub for use with 197mm dropouts - Rapid Drive 108 hub instantly transfers effort into forward momentum - Flange diameter: 58mm - NDS flange offset: 59.5mm - DS flange offset: 46mm - 32 hole, 6-bolt rotor
All-City Go-Devil Front Disc
$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical. We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced. We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included. On all models we spec high-quality made in Japan stainless-steel sealed bearings. Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world. - Weight: Disc Brake: 164g - Includes 12mm, 15mm endcaps and quick release skewer - Non-Drive Side Center To Flange Disc Brake: 21mm - Drive Side Center To Flange Disc Brake: 36mm - Non-Drive Flange Diameter Disc Brake: 58mm - Drive Side Flange Diameter Disc Brake: 45mm
Shimano Deore XT M8100 Front Hub
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance
Shimano Metrea Dynamo 3.0W Center Lock Disc Front Hub
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels. - New internal unit construction is 28g lighter than DH-T8000-3D - More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000 - Angular contact bearings - Compact & lightweight - Low rotational resistance - Durable sealing performance
Shimano Saint Rear Freehub (135mm)
$174.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
Shimano Dura-Ace Track Hi-Flange Rear Hub
$191.99 - $196.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.
Shimano Alfine Centerlock Dynamo Hub
$143.99
Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g
Surly Ultra New Disc Rear Hub
$100.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!
SRAM 900 Front Hub
$83.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike. - Fully convertible with tool-free end caps - 24, 28 or 32 spoke holes
Shimano HB-RS470 Front Hub
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
Shimano Alfine S7001 8-Speed Disc Brake Rear Hub
$244.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible - Rotor lockring not included - Hub Center to Flange: 30.0mm - Hub Drilling: 32-hole - Flange Diameter: 92.5mm - Drivetrain Speeds: 8 - Spoke Interface: J-Bend
Shimano Dura-Ace Track HB-7710 Low-Flange Front Hub
$140.99 - $144.99
- Aluminum Hub Shell - Over Locknut: 100mm - Stainless Steel Ball Bearings - Spoke Hole Circle: 38mm - Center to Flange (Right): 37mm - Center to Flange (Left): 37mm - Average Weight: 203g
Shimano Dura-Ace Track HB-7710 Low-Flange Rear Hub
$162.99
- Aluminum Hub Shell - Super polished Bearing Races - Over Locknut: 120mm - Stainless Steel Ball Bearings - Contact Sealing: Dust Cap - Average Weight: 298g (w/o lockring)
Shimano Dura-Ace Track Hi-Flange Front Hub
$177.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.
Shimano 105 HB-R7000 Rim Brake Front Hub
$32.99
Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance
Shimano SLX M7100 Front Hub
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-free 15mm thru axle system is stiff and lightweight - Simple setup and reliable trail performance
Shimano Alfine S7001 11-Speed Disc Brake Rear Hub
$459.99
Shimano's Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 11 speeds, all with the reliability and low maintenance you can only get with an internally geared hub. - Center Lock Disc Rotor Compatible
Shimano Deore XT M756 6-Bolt Disc Front Hub
$53.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Shimano Deore XT M8100 Straight Pull Front Hub
$70.99
With simple setup and reliable trail performance, the Shimano Deore XT front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with spline mount and lock ring - Toolless 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance - Hole Count: 28
Bontrager Rapid Drive Fat Front Hub
$99.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 150mm forks - Flange diameter: 58mm - NDS flange offset: 45mm - DS flange offset: 53.5mm - 32 hole, 6-bolt rotor
Bontrager Rapid Drive non-Boost Front Hub
$74.99
Whether it's a custom build or just a replacement, these hubs are the foundation for a high-quality wheelset. Product details - Bontrager front hub for use with 100mm forks - Flange diameter: 58mm - NDS flange offset: 20.5mm - DS flange offset: 32.75mm - 28 hole, 6-bolt rotor
Shimano Saint Front Hub
$100.99
From World Cup DH runs to sessioning your local trails, Shimano's Saint front hub is the answer. Centered around an oversize hub shell and a 20mm thru-axle, the Saint Front Hub is rock solid, with beefy flanges and Shimano's angular contact bearings, which balance destructive impacts from any direction. And, Shimano's Centerlock Rotor Mount makes installing rotors a breeze.
Page 1 of 1