Filter By:
- 24-Inch & Smaller (6)
- 26-Inch (8)
- 650B (28)
- 29-Inch (25)
- 700c, 27-Inch & 650c (63)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Wheels

$727.00
Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way.
This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide.
- Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions.
- Lower tire pressures and larger volume provides a compliant ride with fewer vibrations.
- Significant watt savings when running larger tires at lower pressure.
- Wide, hookless rims create a seamless transition to the tire, reducing drag.
- Fastest with 28mm, but fits wide gravel tires as well
- New Zipp graphics and cosmetic identity that scream speed

$2,321.00
Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway.
Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable.
Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff.
The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride.
At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability.
- Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile
- Our lightest tubeless wheel yet, making it a fast-puncher ready to fight
- Optimized tire bed for easy tire installation
- TSE for greater efficiency and reduced rolling resistance
- Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth
- Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction
- Ships with 12mm end caps
- Center Lock rotor interface. Lockring is included
- Zipp graphics applied using Zipp's ImPress direct-print technology
- Lifetime warranty

$755.00
The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight.
- Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight
- Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels
- A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

$174.99
Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance.
- Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum
- Updated rim design and stronger G609 alloy stands up to hard hits
- Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system
- Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel
- Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear
- 14G spokes with brass locking nipples
- 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately
- Includes TLR rim strip installed and TLR valve

$1,600.00
The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65.
- Application: Road Race, Triathlon, Time-Trial
- Internal Rim Width: 21mm
- Compatible Tire Size: Tubeless 25c or larger
- Wheelset Weight: 1641g
- Real World Foundation Aero Technology
- Wide Hookless Bead provides pot-hole protection
- Tubeless Optimized for Rolling Fast and Fewer Flats
- Lifetime Incident Protection and 5 Year Factory Warranty
- Handmade in Ogden, Utah

$2,550.00
- Lighter, wider, stronger and more flat resistant
- Ride Tuned – Smoother ride improves tracking, control, and reduces fatigue
- Wide hookless bead dissipates impact energy and prevents pinch flats.
- 30% increase in impact toughness, 60% more flat resistant
- Optimized for 2.3-2.5" tires

$1,002.00
Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore—is purpose-built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure.
- All-day comfort and compliant ride
- Available in 700c or 650b
- 27mm wide internal profile
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Less fatigue, which allows you to ride longer and faster
- Frustration-free tire installation
- ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement
- Lifetime Warranty

$239.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 20-inch

$259.99
- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes
- Black Ops MX1100 hubs with sealed bearings and laced with DT spokes
- 24mm inner rim width supports a variety of modern sizes
- OLD: Front: 100mm, Rear: 110mm
- Gears: Singlespeed freewheel
- Type: Tube only
- Size: 24-inch

$61.99
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 18-inch
- ISO Diameter: 355 / 18-inch BMX
- Front Axle: 3/8-inch x 100mm
- Tire Type: Clincher

$69.00
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

$1,600.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders.
- 30mm internal rim width
- Gravity rated impact strength
- Rim shape tuned for compliance and damping
- Wide Hookless Bead Anti-pinch flat technology

$1,600.00
Proven ENVE gravel wheel technology comes to the Foundation family with the AG25. Ready for high-speed adventure.
- Intended Use: Gravel, Bikepacking
- Inner rim width: 25mm
- Recommended Tire Size: 36mm – 50mm
- Tubeless Optimized; Tube Compatible
Preparation is key to a successful adventure into uncharted territories. Our experiences developing and riding the flagship G Series and M Series have created a quiver of performance enhancing features that have been incorporated into the AG25. Features like our patented Wide Hookless Bead, tuned carbon materials, external nipples and our Foundation Road Hub all come together for a gravel wheel that's more than the sum of its parts. It's ready to take an already exceptional bike to a level of even higher performance and higher fun.
Wide Hookless Bead Flat Protection
Goodbye to pinch flats: The cringe-inducing impact between rock and rim is something we've all experienced when the desire to shred trail overwhelms our better judgement. Unless you're running too much tire pressure, that impact will typically result in a pinch flatted tire.
Gravel Ride Tune
By using on board data acquisition equipment and aligning it with subjective test ride feedback, our laminate design team have refined the AG25 to deliver a ride quality that is both responsive and compliant, supportive yet forgiving.
- Shallow rim depth of 21mm allows improves vertical compliance and vibration damping
- Rim cross-section and laminate optimized for responsive power transmission and cornering stability
Built to Shrug Off Your Bad Ideas
So, you've decided to descend that mountain bike trail on your gravel rig. Or maybe you didn't have a choice, it was the only way to get from point A to point B. No worries, we encourage it. Which is why we've designed and tested the Foundation AG wheels using our proven M Series impact testing protocol. The result is a wheel that inspires confidence when you need it the most, even when you aren't looking for it.
External Molded Nipples
Reliability first, serviceability also first: By employing ENVE's patented molded spoke hole technology and configuring it for external nipples, you can rest assured that you're riding a wheel that's been built for reliability and serviceability when you need it most.
Enve Foundation Road Hub
Utilizing ENVE's core hub technologies the Foundation Road Hub delivers a high performance, maintenance-free ride experience.
- Flange spacing and hub shell geometry designed to maximize performance metrics such as wheel and drive stiffness
- ID360 40t drive mechanism delivers efficient and responsive power transmission
- Maintenance free premium full contact sealed NTN steel bearings
- Perfect Preload
USA Made, Protected for Life
It's no secret that we at ENVE are proud of our U.S. based manufacturing capabilities. Like all our rims, the Foundation Collection and its AG25 are handmade and assembled in our Ogden, Utah based, state-of-the-art carbon wheel manufacturing facility. The AG25 is covered under ENVE's Lifetime Incident Protection program and 5 Year Factory Warranty.

$352.90 - $379.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape

$1,441.90
The CRC 1400 Spline db 24 - a wheel for all these challenges off the beaten roads. No matter if you are competing in cyclocross races, gravel adventures or simply the prestigious CX-lunchride with your colleagues. This wheel will bring a big smile onto your face. The full carbon tubeless ready rim, laced to a straight pull 240s based hub, combines maximum reliability for the harsh off-road. Perfectly suited for the use of extra-wide tubeless tires, you'll be impressed by the combination of lightweight, comfort and grip while searching for new adventures off the beaten roads.

$611.90
The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character.
- OXiC rim surface technology for improved braking performance and wear
- Tubeless Ready rim compatible with standard clincher tires
- 240 hub and ProLock Squorx ProHead spokes built with radial lacing
- Factory installed tubeless-ready tape
- Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads

$426.90
The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs.
- Welded Aluminum rim with 30mm internal width
- 350 hub with 36 point SL Ratchet system
- Competition spokes and Squorx nipples
- Designed for All Mountain applications

$255.90
After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains.
- Intended use = XC and All-Mountain/Trail
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

$352.90 - $379.90
Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

$213.90
When heavy duty riding is your passion, the C 1800 is the right partner fro any mission. It is right at home at anything from jumping obstacles, cutting through mud and sprinting up steeps. Trademark DT Swiss reliability coming from precision hubs, sturdy bladed spokes and superb wheel build guarantee trouble free rides.
- Spline hub
- Straight-pull hub and spokes are laced 2-cross
- Includes tubeless ready tape and tubeless valve

$975.90
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel.
- Designed for All Mountain applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$77.49 - $92.99
- STW ST1 26.5mm wide alloy rims
- KT QR ATB 9mm/100/108 axle
- Black or Silver UCP spokes

$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed

$1,750.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders.
- 30mm internal rim width
- Gravity rated impact strength
- Rim shape tuned for compliance and damping
- Wide Hookless Bead Anti-pinch flat technology

$69.99
Sta-Tru Double Wall Rear Wheels
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 700c
- Cassette Body Type: Threaded Standard 1.37" x 24tpi
- ISO Diameter: 622 / road / 29"
- Valve: Schrader
- Tire Type: Clincher

$2,321.00
- Zipp’s ultimate road racing wheelset. Aerodynamically efficient and stable in all wind conditions.
- Optimized for 28mm tubeless tires at lower pressure for reduced rolling resistance and vibration damping.
- Total System Efficiency (TSE) approach addresses wind resistance, gravity, rolling resistance, and vibration losses.
- More than 400 grams lighter than its predecessor
- Hookless rims for a more seamless and aerodynamic transition between tire and the rim
- Cognition V2 Hubset with an updated Axial Clutch V2 mechanism for quicker engagement, lower friction, and improved durability.
- Center locking rotor interface. Lockring is included with the wheels
- 1360g
- Lifetime warranty

$975.90
EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes.
- Designed for Enduro applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples

$255.90
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel.
- Intended use = All-Mountain/Trail, Enduro and Freeride
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

$352.90 - $379.90
After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains.
- Intended use = XC and All-Mountain/Trail
- Tubeless ready, 30mm wide and light rim
- Straight-pull hubs/spokes built with a 3-cross pattern
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
Page 1 of 4
Next page